[
  {
    "module": "235分站监测",
    "file": "src/views/vent/safetyList/common/detail-235.vue:352-369,608-768,888,958-1013",
    "title": "235 页面误用 130 协议 API",
    "severity": "致命",
    "type": "wrong_api",
    "symptom": "235 分站参数下发、改名、删除等操作打到 130 接口，控制/配置失败或污染错误协议设备",
    "root_cause": "从 detail-130 复制后未替换：set130StationData/update130DevName/remove130Device/remove130Substation；api 中亦无对应 235 写接口",
    "repro": "在 235 监测详情编辑并下发任意参数，观察请求 URL 含 130 路径",
    "fix_hint": "补齐并改用 235 专用读写/删除 API，移除 130 引用",
    "id": "BUG-001",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "主风机管控",
    "file": "src/views/vent/monitorManager/mainFanMonitor/index.vue:1609-1662",
    "title": "倒机正转/反转共用同一 paramcode",
    "severity": "致命",
    "type": "control buttons sharing same paramcode",
    "symptom": "changeSmoke1 场景下正启动与反启动都下发 CtrlFan1ToFan2 / CtrlFan2ToFan1，无法区分正反转倒机指令",
    "root_cause": "同文件 changeSmoke 分支正确使用 CtrlFan1ToFan2Forward/Reverse 与 CtrlFan2ToFan1Forward/Reverse，但 changeSmoke1 分支正反转都调用无方向后缀的同一点位",
    "repro": "风机处于正转/反转运行态触发一键倒机（modalType=changeSmoke1）→ 对比下发 paramcode",
    "fix_hint": "与 changeSmoke 分支对齐，正转用 *Forward、反转用 *Reverse",
    "id": "BUG-002",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "喷淋监控系统",
    "file": "src/views/vent/monitorManager/sprayMonitor/index.vue:68-140",
    "title": "多路控制按钮共用同一 paramcode/value",
    "severity": "致命",
    "type": "wrong_control_payload",
    "symptom": "急停/补水阀/搅拌阀/组化泵/上料机/搅拌电机/上料自动/喷洒自动等按钮下发同一 paramcode，无法区分控制对象",
    "root_cause": "operations 全部使用 key='run_auto_sign'，且多数 value='0'；BasicMonitoring.deviceControl 仅按 key/value 下发",
    "repro": "打开喷淋监控 → 分别点击不同操作按钮 → 抓包/日志观察 paramcode 全为 run_auto_sign",
    "fix_hint": "为每个操作配置真实设备参数码（如急停、补水阀、搅拌阀等各自 key），并核对 value 语义",
    "id": "BUG-003",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "喷雾降尘监控",
    "file": "src/router/helper/routeHelper.ts:21-28,98-113,122-146",
    "title": "layouts/RouteView 组件文件缺失导致路由无法解析",
    "severity": "致命",
    "type": "missing_component",
    "symptom": "菜单 component 配为 layouts/RouteView 的父级打开空白/路由失败",
    "root_cause": "src/layouts 下无 RouteView.vue；LayoutMap 未注册；dynamicImport 只扫 views/components",
    "repro": "后端菜单配置 component=layouts/RouteView 后进入喷雾降尘父路由",
    "fix_hint": "新增 layouts/RouteView.vue 并加入 LayoutMap；菜单改为已存在布局",
    "id": "BUG-004",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/common.api.ts:3-10,46",
    "title": "bjlist 引用不存在的 Api.bjlist",
    "severity": "致命",
    "type": "undefined_api_ref",
    "symptom": "瓦斯管道故障诊断轮询请求 url 为 undefined，列表/曲线无法加载",
    "root_cause": "enum Api 无 bjlist 成员，但 bjlist() 仍使用 Api.bjlist",
    "repro": "宝德矿打开瓦斯预警→管道故障诊断，抓包看请求 URL",
    "fix_hint": "恢复 bjlist='/safety/ventanalyAlarmLog/list' 或改用 warningHistoryList 路径",
    "id": "BUG-005",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采泵站管控",
    "file": "src/views/vent/monitorManager/gasPumpMonitor/components/gasPumpHome.vue:159-178,355-375,329-333",
    "title": "就地/远程与检修控制 paramcode 对调且入参分支不匹配",
    "severity": "致命",
    "type": "inverted_control_mapping",
    "symptom": "点就地/远程下发 jxmsqh；点检修下发 ykjdqh；传 0 时 handlerType 不赋值仍弹密码框",
    "root_cause": "changeCtr 写死 jxmsqh、changeMode 写死 ykjdqh；模板传 0/1，函数判 1/2",
    "repro": "抽采泵站管控点就地/远程/检修开闭→确认密码→抓包 paramcode",
    "fix_hint": "changeCtr→ykjdqh，changeMode→jxmsqh；统一 0/1 分支",
    "id": "BUG-006",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "测风装置管控",
    "file": "src/views/vent/monitorManager/windrectMonitor/windrect.api.ts:59; src/views/vent/monitorManager/windrectMonitor/index.vue:769-771",
    "title": "测风导出函数实际请求导入接口",
    "severity": "致命",
    "type": "export calling wrong import API",
    "symptom": "一键测风结果导出不会调用 /safety/testwindDetail/exportXls，而是 POST /sys/user/importExcel，导出失败或误触发用户导入接口",
    "root_cause": "exportXls 实现写成 defHttp.post({ url: Api.importExcel })，而 index.vue 的 exportExcel 直接调用该函数（未使用正确的 getExportUrl）",
    "repro": "打开测风装置管控 → 触发 exportExcel(id) / 结果导出 → 抓包可见请求 importExcel",
    "fix_hint": "改为 defHttp.post({ url: Api.exportXls, params })，并确认 method/responseType 与导出一致",
    "id": "BUG-007",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯日报分析",
    "file": "src/views/vent/gas/gasReportInspect/index-time.vue:62-82",
    "title": "空 records 时先访问 [0] 导致挂载崩溃",
    "severity": "致命",
    "type": "crash_on_mount",
    "symptom": "无日报数据时 Cannot read properties of undefined，页面白屏",
    "root_cause": "先读 tableList[0].id/content，后才判 length；JSON.parse 无空保护",
    "repro": "瓦斯日报分析在 queryReportList 返回空 records 时进入页面",
    "fix_hint": "先判空 return；JSON.parse 包 try/catch（index-type/index-lt 同改）",
    "id": "BUG-008",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯监测预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/common.api.ts:3-10,46",
    "title": "bjlist 引用未定义的 Api.bjlist",
    "severity": "致命",
    "type": "api",
    "symptom": "gasWarn 拉取报警历史时 url 为 undefined，请求失败",
    "root_cause": "enum Api 未声明 bjlist，但 bjlist() 使用 Api.bjlist",
    "repro": "进入瓦斯监测预警并触发 bjlist 调用 → 控制台/网络见 undefined URL",
    "fix_hint": "在 Api 中补齐报警历史路径（并与后端对齐），或改为已有正确枚举字段",
    "id": "BUG-009",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "色谱仪报表分析",
    "file": "src/views/vent/bundleSpy/bundleSpyTable/index.vue:134-147",
    "title": "色谱仪报表被硬编码 mock 覆盖真实 API",
    "severity": "致命",
    "type": "mock_override",
    "symptom": "页面恒显示写死的 10月2日假报表，真实 queryReportData 不调用",
    "root_cause": "getbundleSpyInfoList 被注释，改为本地写死 res 对象",
    "repro": "打开色谱仪报表分析首页列表 → 数据固定为 10月2日样例，与后端无关",
    "fix_hint": "恢复 await getbundleSpyInfoList({ type: 'bundleSpy', ...params }) 并删除硬编码",
    "id": "BUG-010",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "预警联动控制",
    "file": "src/views/vent/deviceManager/workingFace/workingFace.api.ts:18-21,79-90",
    "title": "智能管控批量删除/导入导出误指向 /sys/user/*",
    "severity": "致命",
    "type": "wrong_endpoint",
    "symptom": "批删打到用户批量删除接口，可能删错资源或失败；单删走 managesys 正确路径",
    "root_cause": "deleteBatch/importExcel/exportXls 从用户模块拷贝未改",
    "repro": "预警联动勾选多条批删，抓包确认 /sys/user/deleteBatch",
    "fix_hint": "改为 /safety/ventanalyManageSystem/deleteBatch 及对应导入导出路径",
    "id": "BUG-011",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "130分站监测",
    "file": "src/views/vent/safetyList/common/detail-130.vue:865-892",
    "title": "devInfoList 空指针（同 index/detail）",
    "severity": "严重",
    "type": "null_crash",
    "symptom": "130 分站无子设备时列表处理抛错",
    "root_cause": "el.children.forEach 未处理 null/undefined devInfoList",
    "repro": "打开 130 详情页并选中无设备分站",
    "fix_hint": "遍历前 `el.children = el.devInfoList || []`",
    "id": "BUG-012",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "130分站监测",
    "file": "src/views/vent/safetyList/safetyList.api.ts:23-25,72,76",
    "title": "删除130分站/传感器误调158删除接口",
    "severity": "严重",
    "type": "api",
    "symptom": "130 分站删除可能删错资源或后端拒绝，与 158 接口串用",
    "root_cause": "remove130Substation/remove130Device 分别使用 Api.remove158Substation/Api.remove158Device，尽管 enum 已定义 remove130*",
    "repro": "130 分站详情执行删除分站或传感器 → 查看请求 URL 是否含 remove158*",
    "fix_hint": "改为 Api.remove130Substation / Api.remove130Device",
    "id": "BUG-013",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "158分站监测",
    "file": "src/views/vent/safetyList/common/detail.vue:977-1002,1013-1022",
    "title": "devInfoList 为空时 forEach 崩溃",
    "severity": "严重",
    "type": "null_crash",
    "symptom": "部分分站无子设备时详细信息表加载失败",
    "root_cause": "el.children = el.devInfoList 后未判空直接 forEach（getStationList1/getStationListAll）",
    "repro": "选择无测点的分站查看详细信息",
    "fix_hint": "使用可选链或默认空数组后再遍历",
    "id": "BUG-014",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "一张表",
    "file": "src/views/vent/monitorManager/deviceMonitor/staticSheets/gasSheet.vue:1-151",
    "title": "瓦斯一张表静态硬编码 HTML，无实时数据",
    "severity": "严重",
    "type": "data",
    "symptom": "瓦斯参数表固定静态内容，非实时监测",
    "root_cause": "硬编码表格，无数据请求",
    "repro": "打开瓦斯一张表观察数据不更新",
    "fix_hint": "接入瓦斯监测/抽采接口动态填充",
    "id": "BUG-015",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "光纤测温监测",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/device/modal/fiber.modal.vue:239-243",
    "title": "光纤弹窗 Object.keys(readData) 空指针",
    "severity": "严重",
    "type": "null deref on mount/update",
    "symptom": "设备无 readData 时打开弹窗直接 TypeError",
    "root_cause": "未判断 item.readData 即 Object.keys(item.readData)",
    "repro": "选中 readData 为空的光纤设备打开详情",
    "fix_hint": "if (!item.readData) return; 后再解析分段温度",
    "id": "BUG-016",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "光纤测温监测",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/device/modal/fiber.modal.vue:49,169-188,232-257",
    "title": "光纤详情风险等级与预警历史写死假数据",
    "severity": "严重",
    "type": "mock hardcode replacing real API",
    "symptom": "风险等级恒为“低风险”，预警历史永远是测点6/318℃等假记录，不随真实报警变化",
    "root_cause": "模板写死低风险；warningConfig.data 硬编码数组，watch 未用真实告警填充",
    "repro": "打开光纤测温弹窗 → 对比真实告警与滚动板内容",
    "fix_hint": "绑定设备真实风险字段与告警历史接口/数据",
    "id": "BUG-017",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "喷淋监控系统",
    "file": "src/components/vent/BasicMonitoring.vue:19,193-201",
    "title": "操作列表 :key 冲突 + 空场景崩溃",
    "severity": "严重",
    "type": "vue_key_collision/null_crash",
    "symptom": "喷淋多个按钮共用 key 导致 DOM 复用异常；无场景数据时页面直接抛错白屏",
    "root_cause": "v-for 使用 item.key 作唯一键但喷淋键重复；getSysDataSource 无空数组守卫直接取 options[0].id",
    "repro": "1) 打开喷淋页观察按钮交互状态错乱；2) 后端返回空 records 时进入页面立即报错",
    "fix_hint": "key 使用 label 或唯一 id；取首项前判断 records.length",
    "id": "BUG-018",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "喷雾降尘监控",
    "file": "src/views/vent/home/configurable/dust.vue:87-93",
    "title": "服务端配置被测试数据覆盖且只用 Mock",
    "severity": "严重",
    "type": "hardcoded_override",
    "symptom": "粉尘首页始终展示 testConfigDust + BDDustMock，真实监测数据不刷新",
    "root_cause": "fetchConfigs('dust') 后强制 configs=testConfigDust，并用 Promise.resolve(BDDustMock) 代替 getHomeData",
    "repro": "任意环境打开粉尘可配置首页，对比接口与页面数据源",
    "fix_hint": "生产移除测试覆盖，恢复 getHomeData 轮询",
    "id": "BUG-019",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "喷雾降尘监控",
    "file": "src/views/vent/home/configurable/dustControl.vue:53-54",
    "title": "错误 pageType 拉取后再覆盖测试配置",
    "severity": "严重",
    "type": "wrong_param/hardcoded_override",
    "symptom": "降尘管控页配置与粉尘业务不匹配，最终仍被本地测试配置覆盖",
    "root_cause": "fetchConfigs('mine_fire') 后 configs.value=testConfigDustControl",
    "repro": "打开 dustControl 页检查 configuration 请求 pageType 与最终 configs",
    "fix_hint": "使用正确粉尘 pageType，并按环境决定是否使用测试配置",
    "id": "BUG-020",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/gasWarn.vue:311",
    "title": "gasGlFaultDia 无防护 JSON.parse 可抛错",
    "severity": "严重",
    "type": "crash_on_mount",
    "symptom": "缺/非法 gasGlFaultDia 时脚本异常，故障诊断页中断",
    "root_cause": "JSON.parse(data.readData.gasGlFaultDia) 无空值与 try/catch",
    "repro": "故障诊断选中无 gasGlFaultDia 的设备",
    "fix_hint": "JSON.parse(x||'{}') 并 catch 给默认坐标",
    "id": "BUG-021",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/ventilateWarn.vue:239-250",
    "title": "从巷道阻力分析切回通风监测后轮询不恢复",
    "severity": "严重",
    "type": "timer_not_restarted",
    "symptom": "切回通风监测后顶部/测点停止自动刷新",
    "root_cause": "btnClick(0) 只 clearNetTimer+getMenuList，未 getMonitor(true)",
    "repro": "通风监测→巷道阻力→再点通风监测，等待>3s 看是否更新",
    "fix_hint": "ind===0 时调用 getMonitor(true)",
    "id": "BUG-022",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/fireWarn.vue:74-83,148-157,173-185,215-217",
    "title": "匿名 setTimeout 未清理且 getMonitor 不先 clear",
    "severity": "严重",
    "type": "timer_leak",
    "symptom": "快速切换/离开后仍请求 sysTypeWarn；可能双轮询",
    "root_cause": "cardClick/reset 的 setTimeout 无句柄；getMonitor 赋值前不清旧 timer",
    "repro": "火灾预警连点内因/外因后返回首页，抓包仍见请求",
    "fix_hint": "保存 delay timer 并在 unmount clear；getMonitor 开头 clearPollTimer",
    "id": "BUG-023",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/common/external-fourc.vue:147-153",
    "title": "四参外因温度误绑 fireval",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "温度监测显示错误/空",
    "root_cause": "与 threec 相同拷贝错误 val: el.readData.fireval",
    "repro": "打开外因四参温度列表",
    "fix_hint": "改为 temperature",
    "id": "BUG-024",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/gasWarn.vue:346-365",
    "title": "宝德矿第三 Tab 映射到瓦斯参数而非预警指标",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "菜单第三项「预警指标」点击却渲染 gasParamter(wscs)",
    "root_cause": "getMonitorComponent(宝德)=[预警监测,故障诊断,预警指标]；btnClick ind===2 固定 isShow='wscs'",
    "repro": "sysOrgCode=sdmtjtbdmk 打开瓦斯预警点第三个类型按钮",
    "fix_hint": "宝德 ind===2 → yjzb；布尔台 ind===2 保持 wscs",
    "id": "BUG-025",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/gasWarn.vue:368-377",
    "title": "宝德预警监测卡片误走故障诊断轮询",
    "severity": "严重",
    "type": "wrong_comparison",
    "symptom": "预警监测点卡片会走 bjlist，菜单被故障设备覆盖",
    "root_cause": "cardClick 仅按 isflag=='1' 分支，未看 isShow/activeIndex",
    "repro": "宝德→预警监测→切换工作面卡片，观察是否请求 bjlist",
    "fix_hint": "yjjc→getMonitor；gzzd→getMonitor1",
    "id": "BUG-026",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/alarmHistoryTable.vue:166-167",
    "title": "未传 deviceType 时 strtype 变成 \"undefined*\"",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "设备预警报警历史过滤错误，列表空或错数据",
    "root_cause": "beforeFetch: props.deviceType + '*'；deviceWarn.vue:43 未传 deviceType",
    "repro": "设备监测预警→报警历史，检查请求 strtype",
    "fix_hint": "传入正确 deviceType，或空时不拼 strtype",
    "id": "BUG-027",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/common/external-threec.vue:118-124",
    "title": "温度传感器列表误绑 fireval",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "外因火灾温度卡片显示火焰字段/空值",
    "root_cause": "temperature.map 使用 readData.fireval；mainWell 正确用 temperature",
    "repro": "外因火灾 temperature 有值、fireval 空时看温度卡",
    "fix_hint": "改为 el.readData.temperature（fourc:147-153 同步）",
    "id": "BUG-028",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/gasWarn.vue:193",
    "title": "甲烷显示运算符优先级错误",
    "severity": "严重",
    "type": "wrong_operator_precedence",
    "symptom": "gasC 为空时显示 \"undefined%\" 而非 '--'",
    "root_cause": "el.readData.gasC + '%' || '--' 中字符串恒 truthy",
    "repro": "测点 gasC 缺失时看左侧甲烷值",
    "fix_hint": "(gasC!=null&&gasC!=='') ? gasC+'%' : '--'",
    "id": "BUG-029",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/dustWarn.vue:131-143,166-176",
    "title": "粉尘预测曲线每轮 push 不清理导致无限膨胀",
    "severity": "严重",
    "type": "timer_state_leak",
    "symptom": "停留越久曲线点越多、内存升高",
    "root_cause": "fillChartByIndex 每秒 echartYc.push；仅 topAreaClick 会清空",
    "repro": "粉尘预警停留数分钟观察 echartYc 长度",
    "fix_hint": "每次 fill 前重置 echartYc，或替换最新点",
    "id": "BUG-030",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/ventilateWarn.vue:10",
    "title": "返回按钮权限取反",
    "severity": "严重",
    "type": "inverted_permission",
    "symptom": "有 gasWarn:return 权限看不到返回；无权限反而显示",
    "root_cause": "v-if=\"!hasPermission(...)\"；对照 deviceMonitorWarn 为正逻辑",
    "repro": "分配 gasWarn:return 后对比返回按钮显隐",
    "fix_hint": "改为 hasPermission；fire/dust/ventilate/device/waterLevel 同步",
    "id": "BUG-031",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "安全监控分站管理",
    "file": "src/views/vent/safetyList/index.vue:234-257,408-417",
    "title": "卸载引用未定义 timer + children 空指针 + 分页 total 错误",
    "severity": "严重",
    "type": "reference_error/null_crash",
    "symptom": "离开页面报 timer is not defined；devInfoList 为空时列表渲染崩溃；分页总数异常",
    "root_cause": "timer 声明被注释但 onUnmounted 仍引用；el.children=el.devInfoList 后直接 forEach；res.total 在数组结果上常为 undefined",
    "repro": "进入页再离开；返回含 null devInfoList 的分站；观察 pagination.total",
    "fix_hint": "删除或恢复 timer；`(el.devInfoList||[]).forEach`；按接口实际结构取 records/total",
    "id": "BUG-032",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "密闭监测系统",
    "file": "src/views/vent/monitorManager/obfurageMonitor/index.vue:89-138",
    "title": "空数据崩溃且切换系统不刷新关联设备",
    "severity": "严重",
    "type": "null_crash/stale_state",
    "symptom": "无密闭系统/无关联设备时崩溃；切换密闭点后历史页设备 Tab 仍是旧设备",
    "root_cause": "直接访问 msgTxt[0]、deviceArr[0]；getSelectRow 只改 optionValue，未调用 getDeviceList",
    "repro": "空数据进页；有多套密闭→切换后打开历史监测看设备按钮未更新",
    "fix_hint": "空数组守卫；getSelectRow 内调用 getDeviceList()",
    "id": "BUG-033",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "局部风机管控",
    "file": "src/views/vent/monitorManager/fanLocalMonitor/index.vue:782-791",
    "title": "风筒直径控制按钮重复且同 key",
    "severity": "严重",
    "type": "control buttons sharing same paramcode",
    "symptom": "控制区出现两个相同“风筒直径”按钮，key 均为 diameter，行为完全重复",
    "root_cause": "leftBtnArr 中 diameter 配置项被复制粘贴两次",
    "repro": "开启 fanLocal:diameter → 顶部控制按钮可见重复项",
    "fix_hint": "删除重复配置；若本意为主/备直径，需不同 key 与 paramcode",
    "id": "BUG-034",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "工作面来压预警",
    "file": "src/views/vent/monitorManager/betKy/index.vue:112-146,148-154,258-262",
    "title": "矿压监测轮询逻辑错误且特定矿用假数据",
    "severity": "严重",
    "type": "mock hardcode + setInterval/setTimeout poll without proper clear",
    "symptom": "A02A02 矿强制使用 ceshi.json；轮询前把 timer 置 null 未 clearTimeout，chartData 每次 push 不清理导致曲线数据膨胀错乱；卸载用 clearInterval 清 setTimeout",
    "root_cause": "chartData 每轮 push 不清空；timer=setTimeout 却 clearInterval；重启只置 null 不 clear",
    "repro": "返回含 readData=null 的 Minepressure 列表",
    "fix_hint": "每轮 chartData=[]；统一 clearTimeout 并先 clear 再置空",
    "id": "BUG-035",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "报表数据映射",
    "file": "src/views/vent/reportManager/comment/reportMap.vue:82-119,135-145",
    "title": "reactive 表单被整体重赋值 + 部门树空 children 崩溃",
    "severity": "严重",
    "type": "reactivity_break/null_crash",
    "symptom": "新增/编辑后表单状态异常；部门节点无 children 时查询部门树直接报错",
    "root_cause": "handleAdd/handleEdit 执行 formState = { ... }，替换了 reactive 代理",
    "repro": "编辑一条映射再点新增观察表单残留；部门树缺 children 的节点触发加载",
    "fix_hint": "用 Object.assign(formState, ...) 或重置字段；forEach 前守卫 children",
    "id": "BUG-036",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "报表数据映射",
    "file": "src/views/vent/reportManager/comment/report-modal.vue:135-151",
    "title": "编辑时 JSON.parse(mineCells) 在非字符串时抛错",
    "severity": "严重",
    "type": "type_error",
    "symptom": "编辑已有映射弹窗打开失败或控制台 TypeError",
    "root_cause": "watch 中无条件 JSON.parse(formStates.mineCells)；接口若已反序列化为数组则解析失败；且 Object.assign 不会清除旧 id",
    "repro": "打开编辑，当 record.mineCells 为数组或空时复现",
    "fix_hint": "typeof===string 再 parse，数组则直接使用；新增时显式清空 id",
    "id": "BUG-037",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采泵站管控",
    "file": "src/views/vent/gas/gasPumpMonitor/components/monitorChart.vue:50-65",
    "title": "setInterval 用 clearTimeout 清理导致泄漏",
    "severity": "严重",
    "type": "timer_not_cleared",
    "symptom": "离开监测图表后仍每 2s 推数据",
    "root_cause": "setInterval + onUnmounted clearTimeout",
    "repro": "进入监测图表后切走，观察回调是否继续",
    "fix_hint": "改为 clearInterval(timer)",
    "id": "BUG-038",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采泵站管控",
    "file": "src/views/vent/gas/gasPumpMonitor/index.vue:57-68",
    "title": "井下泵模型切换后被无条件覆盖为地上泵",
    "severity": "严重",
    "type": "copy_paste_bug",
    "symptom": "选中 pump_under* 仍加载地上 gasPump 三维",
    "root_cause": "if/else 设类型后末尾又 setModelType('gasPump')",
    "repro": "抽采泵站监测切到井下泵站设备",
    "fix_hint": "删除末尾无条件 setModelType('gasPump')",
    "id": "BUG-039",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采达标评判",
    "file": "src/views/vent/gas/gasAssessment/components/gasUnit.vue:27,55,73-75",
    "title": "单元混量/纯量图表写死 mock",
    "severity": "严重",
    "type": "mock_override",
    "symptom": "图表恒为本地假数据，真实监测不驱动",
    "root_cause": "CustomChart 绑定 mockGasUnitHlData/mockGasUnitClData",
    "repro": "打开抽采单元对比接口与图表数据源",
    "fix_hint": "用接口历史数据替换 mock",
    "id": "BUG-040",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采达标评判",
    "file": "src/views/vent/gas/gasAssessment/components/gasControl.vue:32-40,88-112",
    "title": "调控页 getMonitor 空转且阀门无绑定",
    "severity": "严重",
    "type": "incomplete",
    "symptom": "测点值始终为空；阀门开度输入/控制按钮无事件与接口",
    "root_cause": "getMonitor 仅 setTimeout 自调用不请求数据；阀门区无 @click/API",
    "repro": "打开抽采达标评判-调控相关页 → 测点 '-'、按钮无响应",
    "fix_hint": "接入监测 list API 填充 dataSource；为阀门控制绑定下发接口",
    "id": "BUG-041",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采达标评判",
    "file": "src/views/vent/gas/gasAssessment/index.vue:43",
    "title": "进入抽采单元页未传入 unitId",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "侧栏 list({ids}) 为空，实时数据无法对应选中单元",
    "root_cause": "<gasUnit/> 未绑定 :unitId=\"activeUnitId\"",
    "repro": "达标评判点选单元后看 list 请求 ids",
    "fix_hint": "<gasUnit :unitId=\"activeUnitId\" />",
    "id": "BUG-042",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采达标评判/瓦斯抽采单元",
    "file": "src/views/vent/gas/gasAssessment/components/{gasEcharts,gasUnit,gasPipingEcharts}.vue:gasEcharts 14-47; gasUnit 27,55; gasPipingEcharts 13-99",
    "title": "图表永久绑定 mock* 数据",
    "severity": "严重",
    "type": "data",
    "symptom": "抽采单元/管网相关图表始终显示 gasAssessment.data 中的 mock 曲线/饼图，即使列表接口已取到真实测点",
    "root_cause": "模板 :chart-data/:dataSource 直接绑定 mockGasUnitData/mockPieData/mockGasPiping* 等，未接入接口结果",
    "repro": "进入抽采达标评判相关子页 → 图表不随实时监测变化",
    "fix_hint": "用接口返回历史/累计数据替换 mock 绑定；gasUnit 已有 list()，应生成 chart-data",
    "id": "BUG-043",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "掘进面智能管控",
    "file": "src/views/vent/monitorManager/tunFaceMonitor/components/tunFaceHome.vue:254,262-271",
    "title": "掘进面首页无条件解包 warnInfo/readData",
    "severity": "严重",
    "type": "null deref on mount",
    "symptom": "缺 dustS/fireS/gasS/synthesizeS/ventS、缺 surface_history、或缺 location.readData 时页面直接崩溃",
    "root_cause": "无守卫直接访问 res['warnInfo'][x]['devices']、res['surface_history'][0]、data['readData']['flen']",
    "repro": "接口缺任一 warn 分组或 location.readData → 打开掘进面主页",
    "fix_hint": "逐层可选链；缺省赋空数组/空对象",
    "id": "BUG-044",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "文件共享中心",
    "file": "src/views/vent/performance/fileDetail/index.vue:292-314,367-377,387",
    "title": "空树上标崩溃 + 可空文件上传 + nodeParam 丢失响应式",
    "severity": "严重",
    "type": "null_crash/invalid_upload",
    "symptom": "无目录时白屏；未选文件仍可点确定上传；树节点切换后表格参数可能异常",
    "root_cause": "listArr[0] 无守卫；handleOk 不校验 fileList；nodeParam=node 重赋放弃 reactive",
    "repro": "空目录数据进页；打开上传不选文件点确定；切换目录观察列表 parentId",
    "fix_hint": "空树提示；上传前校验 fileList.length；Object.assign(nodeParam, node)",
    "id": "BUG-045",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "智能注氮系统",
    "file": "src/views/vent/monitorManager/compressor/components/nitrogenHome_ln.vue:341-349",
    "title": "监测数据忽略选中系统ID",
    "severity": "严重",
    "type": "wrong_data_binding",
    "symptom": "切换注氮系统后仍展示 msgTxt[0] 数据，监控内容与下拉选择不一致",
    "root_cause": "getDataSource(systemID) 入参未用于请求，固定取 res.msgTxt[0].datalist",
    "repro": "配置≥2套注氮系统→切换下拉→数据不随 systemId 变化",
    "fix_hint": "按 systemID/deviceId 过滤或带参请求对应系统数据",
    "id": "BUG-046",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "智能注氮系统",
    "file": "src/views/vent/monitorManager/compressor/index.vue:93-126",
    "title": "空列表崩溃且 modalType 未随系统类型切换",
    "severity": "严重",
    "type": "null_crash/stale_config",
    "symptom": "无注氮系统时白屏；依赖 modalType 的矿端组件始终按 nitrogenUnderground 建模",
    "root_cause": "options.value[0]['id'] 无空判断；changeModalType 中 modalType 赋值被注释，仅改了 moduleTypeName",
    "repro": "空数据进页崩溃；潞宁等使用 modalType 的矿切换空压机/制氮机后模型类型不变",
    "fix_hint": "空 records 提前 return；恢复按 strsystype 设置 modalType",
    "id": "BUG-047",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "智能注浆系统",
    "file": "src/views/vent/monitorManager/groutMonitor/index.vue:110-119,67,86",
    "title": "空数据崩溃且 currentDeviceType 永不赋值",
    "severity": "严重",
    "type": "null_crash/dead_state",
    "symptom": "无注浆系统时白屏；传给 groutHome 的 device-type 恒为空字符串",
    "root_cause": "options.value[0]['id'] 无守卫；deviceChange 只写 deviceType，从未写入 currentDeviceType",
    "repro": "空列表进页崩溃；有数据时检查 groutHome props.deviceType 为空",
    "fix_hint": "空 records 保护；deviceChange/getSelectRow 同步 currentDeviceType",
    "id": "BUG-048",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "机电硐室管控",
    "file": "src/views/vent/home/configurable/electroChamber.vue:86-99,29-50",
    "title": "拉取配置后强制覆盖为本地测试配置且历史无设备ID",
    "severity": "严重",
    "type": "hardcoded_override/missing_param",
    "symptom": "线上始终使用 testConfigElectro；切历史 Tab 时 deviceId 常为空导致查询无效",
    "root_cause": "fetchConfigs 成功后 configs.value=testConfigElectro；optionValue 仅来自路由 query，无设备选择赋值",
    "repro": "非 A02A02 环境打开页面看配置是否被测试数据覆盖；无 query.id 切历史记录",
    "fix_hint": "生产去掉测试覆盖；补充硐室/系统选择并写入 optionValue",
    "id": "BUG-049",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "束管日报分析",
    "file": "src/views/vent/bundleSpy/bundleSpyTable/index.vue; vent/bundle/bundleMonitorTable/index.vue:bundleSpy:108-109; bundle:101-102",
    "title": "保德 sysOrgCode 大小写错误导致专用列永不命中",
    "severity": "严重",
    "type": "copy_paste_orgcode",
    "symptom": "保德落到 default 列配置，专用字段不显示",
    "root_cause": "写 case 'sdmtjtBdmk'；全库其余为 'sdmtjtbdmk'",
    "repro": "sysOrgCode=sdmtjtbdmk 打开色谱仪/束管日报",
    "fix_hint": "统一改为 sdmtjtbdmk",
    "id": "BUG-050",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "束管日报分析",
    "file": "src/views/vent/bundle/bundleMonitorTable/bundle-table.data.ts:595-610",
    "title": "保德束管 NO₂ 最小值 dataIndex 写成 no22_max",
    "severity": "严重",
    "type": "wrong_column_dataIndex",
    "symptom": "NO₂最小值空白或错值",
    "root_cause": "最小值 dataIndex:'no22_max'，key/dataIndex 交叉贴错",
    "repro": "保德束管日报对比 no2_min/no2_max 与三列",
    "fix_hint": "最大值 no2_max；最小值 no2_min",
    "id": "BUG-051",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "束管日报分析",
    "file": "src/views/vent/bundle/bundleMonitorTable/bundle-table.data.ts:1465-1472,1848-1855",
    "title": "寸草塔一矿/哈拉沟 O₂最大值列绑定 o2_min",
    "severity": "严重",
    "type": "wrong_column_dataIndex",
    "symptom": "标题最大值实际显示最小值",
    "root_cause": "title:最大值 却 dataIndex:'o2_min'",
    "repro": "对应矿打开束管日报对比 o2_max/o2_min",
    "fix_hint": "改为 dataIndex:'o2_max'",
    "id": "BUG-052",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "束管日报分析",
    "file": "src/views/vent/bundle/bundleMonitorTable/index.vue:103-104,453",
    "title": "补连塔图表分支 orgCode 写成 sdmtjtBltmk",
    "severity": "严重",
    "type": "copy_paste_orgcode",
    "symptom": "表格用 Bltcolumns 正确，柱状图落入 default",
    "root_cause": "computedColumns 用 sdmtjtbltmk，getSeriesConfig 用 sdmtjtBltmk",
    "repro": "sysOrgCode=sdmtjtbltmk 对比表头与图例",
    "fix_hint": "图表 case 改为 sdmtjtbltmk",
    "id": "BUG-053",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "火灾监测预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/fireWarn.vue:4",
    "title": "返回按钮权限判断取反（!hasPermission('fireWarn:return')）",
    "severity": "严重",
    "type": "权限逻辑错误",
    "symptom": "有 *:return 权限的用户看不到返回；无权限用户反而可见（与 deviceMonitorWarn 正确写法相反）",
    "root_cause": "使用 v-if=\"!hasPermission('xxx:return')\"；对照 deviceMonitorWarn 应为正向 hasPermission",
    "repro": "分别用有/无 gasWarn:return 等权限账号打开预警页，观察返回按钮显隐",
    "fix_hint": "去掉 !，改为 v-if=\"hasPermission('...:return')\"",
    "id": "BUG-054",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "灾变应急控制",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/emergency/index.vue:196-226",
    "title": "工作面详情多项共用同一数据 code",
    "severity": "严重",
    "type": "wrong field mapping / logic bug",
    "symptom": "工作面编号/采区/煤层都显示 dTotalArea；长度/走向/采高都显示 totallength",
    "root_cause": "analysisDetailDataList 多项复用相同 code，未映射独立字段",
    "repro": "打开灾变应急分析详情区 → 观察多行数值是否雷同",
    "fix_hint": "为每项配置正确业务字段 code，并在 pageData 中补齐对应值",
    "id": "BUG-055",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "灾变应急控制",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/emergency/index.vue:273-275",
    "title": "应急解算局部阻力同样误绑 dHNature",
    "severity": "严重",
    "type": "wrong field mapping / logic bug",
    "symptom": "灾变应急巷道阻力表局部阻力错误",
    "root_cause": "与 network 相同的复制错误：dHLocal: item['dHNature']",
    "repro": "进入灾变应急页加载解算结果 → 查看巷道阻力列",
    "fix_hint": "改为 item['dHLocal']",
    "id": "BUG-056",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "灾变应急控制",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/emergency/index.vue:314-321",
    "title": "应急页传感器 readData 空指针",
    "severity": "严重",
    "type": "null deref on mount/update",
    "symptom": "同网络页，缺 readData 时应急页崩溃",
    "root_cause": "item['readData']['va'] 无空判断",
    "repro": "推送缺 readData 的 monitors → 打开应急页",
    "fix_hint": "对 readData 做空对象兜底",
    "id": "BUG-057",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯人工巡检业务分析",
    "file": "src/views/vent/gas/gasAnalysis/index.vue:177-182,216-219",
    "title": "列表成功后强制 pagination.current=1 导致分页失效",
    "severity": "严重",
    "type": "pagination_logic_bug",
    "symptom": "翻到第 2 页后被打回第 1 页",
    "root_cause": "gasReportLogLists 在有 records 时无条件 current=1",
    "repro": "业务分析多页数据点第 2 页",
    "fix_hint": "删除该赋值；仅查询/重置时置 1",
    "id": "BUG-058",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯人工巡检地点管理",
    "file": "src/views/vent/gas/gasInspectNonfc/components/inspectEdit.vue:12-14,79-81,71-76",
    "title": "区队下拉缺 value 且整对象重赋值打断响应式",
    "severity": "严重",
    "type": "nfc_nonfc_copy_paste",
    "symptom": "提交可能把区队名当 id；二次编辑表单不刷新",
    "root_cause": "option 无 :value；formStateEdit=Object.assign 重赋值丢失 reactive 绑定",
    "repro": "Nonfc 编辑改区队提交看 payload；连续编辑两条",
    "fix_hint": "补 :value=\"item.value\"；Object.assign(formStateEdit, newV) 原地更新",
    "id": "BUG-059",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯人工巡检地点管理（NFC）",
    "file": "src/views/vent/gas/gasInspect/index.vue:66-75",
    "title": "早/中/晚是否巡检真假分支都渲染「是」",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "未巡检也显示「是」，状态失真",
    "root_cause": "text=='1' 与 v-else 内均写「是」",
    "repro": "NFC 地点管理查看未巡检班次列",
    "fix_hint": "else 显示「否」；对齐 Nonfc 字段约定",
    "id": "BUG-060",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯人工巡检报表管理",
    "file": "src/views/vent/gas/gasReport/index.vue:357-440",
    "title": "审核/导出异常校验 else-if 导致任一气体合格即放行",
    "severity": "严重",
    "type": "inverted_validation_logic",
    "symptom": "O2 超限但 CO 合格仍可审核通过；多行以最后一行结果为准",
    "root_cause": "getTs 对 O2/CO/CO2/T/CH4 用 else-if；forEach return 不能结束函数",
    "repro": "仅 O2 异常其余合格→点审核通过",
    "fix_hint": "全部字段均在阈内才放行；任异常即 true",
    "id": "BUG-061",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯人工巡检报表管理",
    "file": "src/views/vent/gas/gasReport/index.vue:271-274",
    "title": "巡检图片 Blob 二次封装错误",
    "severity": "严重",
    "type": "wrong_blob_usage",
    "symptom": "查看班次图片失败或 Failed to construct 'Blob'",
    "root_cause": "gasServerImg 已是 blob，又 new Blob(res,...)；构造需 Array",
    "repro": "日报管理点夜/早/中班「查看」",
    "fix_hint": "URL.createObjectURL(res) 或 new Blob([res],...)",
    "id": "BUG-062",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯监测预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/gasWarn.vue:5",
    "title": "返回按钮权限判断取反（!hasPermission('gasWarn:return')）",
    "severity": "严重",
    "type": "权限逻辑错误",
    "symptom": "有 *:return 权限的用户看不到返回；无权限用户反而可见（与 deviceMonitorWarn 正确写法相反）",
    "root_cause": "使用 v-if=\"!hasPermission('xxx:return')\"；对照 deviceMonitorWarn 应为正向 hasPermission",
    "repro": "分别用有/无 gasWarn:return 等权限账号打开预警页，观察返回按钮显隐",
    "fix_hint": "去掉 !，改为 v-if=\"hasPermission('...:return')\"",
    "id": "BUG-063",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯管网管控",
    "file": "src/views/vent/gas/gasPipeNet/index.vue:142-147",
    "title": "管网阀门控制提交未调控制接口",
    "severity": "严重",
    "type": "undefined_api_call",
    "symptom": "点确定只 toast 表单 JSON，阀门无动作",
    "root_cause": "submitHandler 仅 message.success，无 deviceControl",
    "repro": "管网管控→阀门控制→提交",
    "fix_hint": "接入泵站同款控制 API",
    "id": "BUG-064",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯钻孔监测",
    "file": "src/views/vent/gas/gasZk/index.vue:61-79",
    "title": "setInterval 回调内再 startPolling 造成重叠轮询",
    "severity": "严重",
    "type": "timer_logic_bug",
    "symptom": "慢网时 /drill/get/status 并发堆积",
    "root_cause": "interval 不等待完成可再次触发；成功后又 stop+new interval",
    "repro": "打开钻孔监测并限速网络观察并发",
    "fix_hint": "改为 await 后 setTimeout 串行轮询",
    "id": "BUG-065",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "用户日志管理",
    "file": "src/views/monitor/log/index.vue:2,56-84",
    "title": "v-modal 拼写错误 + 登录统计破坏 searchInfo 响应式",
    "severity": "严重",
    "type": "typo/reactivity_break",
    "symptom": "Tab 无法双向绑定；切到“登录统计”后查询条件失效、列表参数丢失 logType",
    "root_cause": "模板写 v-modal 而非 v-model；case '4' 执行 searchInfo={} 丢掉 reactive 代理",
    "repro": "打开日志页切换 Tab；切到登录统计后再查询",
    "fix_hint": "改为 v-model；用 Object.keys 清空或重置字段，禁止重赋 searchInfo",
    "id": "BUG-066",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "皮带巷管控系统",
    "file": "src/views/vent/monitorManager/beltTunMonitor/components/beltTunHome.vue:260-268",
    "title": "皮带巷首页 warnInfo/sysInfo 无空保护",
    "severity": "严重",
    "type": "null deref on mount",
    "symptom": "sysInfo 或某类 warn 分组缺失时页面加载失败",
    "root_cause": "直接 Object.assign(res['sysInfo'], res['sysInfo']['readData']) 与 warnInfo.*.devices",
    "repro": "返回不完整 beltTun 监测包 → 打开皮带巷主页",
    "fix_hint": "增加空判断与默认值",
    "id": "BUG-067",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "粉尘参数一张表",
    "file": "src/views/vent/monitorManager/deviceMonitor/staticSheets/dustSheet.vue:1-103",
    "title": "粉尘参数一张表静态硬编码 HTML，无实时数据",
    "severity": "严重",
    "type": "data",
    "symptom": "粉尘参数表固定静态内容，非实时监测",
    "root_cause": "硬编码表格，无数据请求",
    "repro": "打开粉尘参数一张表观察数据不更新",
    "fix_hint": "接入粉尘监测接口动态填充",
    "id": "BUG-068",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "粉尘报表分析",
    "file": "src/views/vent/dust/dustMonitorTable/index.vue:317-320,510-513",
    "title": "保德当日粉尘总体最大值误用 zcjqpj/hcjqpj",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "当日分析最大值恒 -Infinity 或字段映射失败",
    "root_cause": "BdMaxValues 用 qc/hc；overallBdMaxValues 误用布尔台字段",
    "repro": "保德粉尘报表切「当日粉尘情况分析」",
    "fix_hint": "overallBdMaxValues 改为 qc/hc",
    "id": "BUG-069",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "粉尘报表分析",
    "file": "src/views/vent/dust/dustMonitorTable/index.vue:269-270,429-436,472-475",
    "title": "哈拉沟分组键 ccdd 被最大值循环改写成 jcdd",
    "severity": "严重",
    "type": "logic_state",
    "symptom": "工作场所下拉变成测点名，过滤错乱",
    "root_cause": "分组 gzcs=ccdd，HlgMaxValues 更新时 gzcs=item.jcdd 覆盖",
    "repro": "哈拉沟粉尘报表看工作场所下拉与过滤",
    "fix_hint": "更新最大值时不要用 jcdd 覆盖 gzcs",
    "id": "BUG-070",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "粉尘监测预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/dustWarn.vue:6",
    "title": "返回按钮权限判断取反（!hasPermission('dustWarn:return')）",
    "severity": "严重",
    "type": "权限逻辑错误",
    "symptom": "有 *:return 权限的用户看不到返回；无权限用户反而可见（与 deviceMonitorWarn 正确写法相反）",
    "root_cause": "使用 v-if=\"!hasPermission('xxx:return')\"；对照 deviceMonitorWarn 应为正向 hasPermission",
    "repro": "分别用有/无 gasWarn:return 等权限账号打开预警页，观察返回按钮显隐",
    "fix_hint": "去掉 !，改为 v-if=\"hasPermission('...:return')\"",
    "id": "BUG-071",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "综采面智能管控",
    "file": "src/views/vent/monitorManager/workFaceMonitor/components/workFaceHome.vue:251-254",
    "title": "定位列表读取 readData.flen 空指针",
    "severity": "严重",
    "type": "null deref on mount/update",
    "symptom": "location 设备无 readData 时过滤阶段抛错，后续监控数据不完整",
    "root_cause": "locationData.push 中直接 data['readData']['flen']",
    "repro": "location.datalist 含 readData=null 的项",
    "fix_hint": "使用 data?.readData?.flen ?? '-'",
    "id": "BUG-072",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "综采面智能管控",
    "file": "src/views/vent/monitorManager/workFaceMonitor/components/workFaceHome.vue:262-276",
    "title": "综合预警判断键错误且可能空指针",
    "severity": "严重",
    "type": "null deref / wrong field mapping",
    "symptom": "用 warnInfo.warnInfo 判断却读取 synthesizeS；键不匹配时综合预警不更新，或 synthesizeS 缺失时崩溃；surface_history/sysInfo 亦缺保护",
    "root_cause": "条件写成 res['warnInfo']['warnInfo']；并对 surface_history[0]、sysInfo.readData 无空保护",
    "repro": "返回缺 synthesizeS 或 surface_history 为空的综采面数据",
    "fix_hint": "条件改为 synthesizeS；对各嵌套字段做空判断",
    "id": "BUG-073",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "色谱仪报表分析",
    "file": "src/views/vent/bundleSpy/bundleSpyTable/index.vue:237-241,386-390",
    "title": "活鸡兔/寸草塔二矿图表 O₂闭内 误绑 CH₄ 数据",
    "severity": "严重",
    "type": "wrong_field_binding",
    "symptom": "图例 O₂闭内 柱状与 CH₄闭内完全相同",
    "root_cause": "name:'O₂闭内' 的 data 写成 ch4AveValues",
    "repro": "对应矿打开色谱仪报表对比 o2_ave 与图",
    "fix_hint": "改为 o2AveValues",
    "id": "BUG-074",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "视频墙",
    "file": "src/views/vent/monitorManager/camera/index.vue:100-128,172-178",
    "title": "设备树加载与分页 paramKind 计算脆弱",
    "severity": "严重",
    "type": "null_crash/wrong_param",
    "symptom": "itemValue 无 '&' 或 msgTxt 结构异常时树展开/翻页失败或请求错误类型",
    "root_cause": "假定 msgTxt[0].datalist 存在；分页用 searchParam.devKind.indexOf('&') 对 nodeData.itemValue 做 substring，缺 '&' 得空串",
    "repro": "点击 itemValue 不含 '&' 的分类再翻页；或返回空 datalist 的节点",
    "fix_hint": "安全解析 itemValue；访问 datalist 前判空；分页直接用 nodeData.itemValue",
    "id": "BUG-075",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "设备监测预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/deviceWarn.vue:5",
    "title": "返回按钮权限判断取反（!hasPermission('deviceWarn:return')）",
    "severity": "严重",
    "type": "权限逻辑错误",
    "symptom": "有 *:return 权限的用户看不到返回；无权限用户反而可见（与 deviceMonitorWarn 正确写法相反）",
    "root_cause": "使用 v-if=\"!hasPermission('xxx:return')\"；对照 deviceMonitorWarn 应为正向 hasPermission",
    "repro": "分别用有/无 gasWarn:return 等权限账号打开预警页，观察返回按钮显隐",
    "fix_hint": "去掉 !，改为 v-if=\"hasPermission('...:return')\"",
    "id": "BUG-076",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "通风参数一张表",
    "file": "src/views/vent/monitorManager/deviceMonitor/staticSheets/ventilateSheet.vue:1-263",
    "title": "通风参数一张表为静态硬编码 HTML，无实时数据",
    "severity": "严重",
    "type": "data",
    "symptom": "页面展示固定矿井参数表（如明安木独等），不刷新监测值",
    "root_cause": "纯静态 table；script 仅注释转换工具，无 API/绑定",
    "repro": "打开通风参数一张表 → 任意时刻数据不变、与监测无关",
    "fix_hint": "改为接口驱动渲染；若仅为示意文档页需在需求中降级为非监测页",
    "id": "BUG-077",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "通风监测预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/ventilateWarn.vue:10",
    "title": "返回按钮权限判断取反（!hasPermission('ventilateWarn:return')）",
    "severity": "严重",
    "type": "权限逻辑错误",
    "symptom": "有 *:return 权限的用户看不到返回；无权限用户反而可见（与 deviceMonitorWarn 正确写法相反）",
    "root_cause": "使用 v-if=\"!hasPermission('xxx:return')\"；对照 deviceMonitorWarn 应为正向 hasPermission",
    "repro": "分别用有/无 gasWarn:return 等权限账号打开预警页，观察返回按钮显隐",
    "fix_hint": "去掉 !，改为 v-if=\"hasPermission('...:return')\"",
    "id": "BUG-078",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "通风网络解算",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/network/index.vue:447-454",
    "title": "传感器列表未判空直接读 readData",
    "severity": "严重",
    "type": "null deref on mount/update",
    "symptom": "monitors 中某条缺少 readData 时 analyzePageResult 抛错，页面解算结果渲染中断",
    "root_cause": "直接访问 item['readData']['va']/['m3']，无空保护",
    "repro": "构造 monitors 项 readData=null 的解算推送 → 打开网络页",
    "fix_hint": "先取 const rd=item.readData||{} 再读字段",
    "id": "BUG-079",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "通风网络解算",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/network/index.vue:403-405",
    "title": "局部阻力字段误读自然风压",
    "severity": "严重",
    "type": "wrong field mapping / logic bug",
    "symptom": "巷道表“局部阻力”与“自然风压”显示相同值，局部阻力失真",
    "root_cause": "dHLocal 赋值使用 item['dHNature']，与 dHNature 同源",
    "repro": "打开网络解算结果表 → 对比局部阻力与自然风压列",
    "fix_hint": "改为读取 item['dHLocal']（或后端真实局部阻力字段）",
    "id": "BUG-080",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "防尘系统监测",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/device/modal/dust.modal.vue:216-238",
    "title": "粉尘弹窗测点状态/预警历史硬编码",
    "severity": "严重",
    "type": "mock hardcode replacing real API",
    "symptom": "测点状态 customRender 永远返回“正常”；预警滚动板为固定假数据",
    "root_cause": "columns.state 写死正常；warningConfig.data 硬编码",
    "repro": "打开粉尘监测详情弹窗观察状态与预警列表",
    "fix_hint": "状态取真实字段；预警列表接真实告警数据",
    "id": "BUG-081",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "需风量分析系统",
    "file": "src/components/vent/micro/createSubApp.vue:15-37",
    "title": "非 micro-* 路径组件恒为 null",
    "severity": "严重",
    "type": "shell_mount_failure",
    "symptom": "菜单若未挂在 micro-need-air/micro-vent-doc 前缀下则壳空白",
    "root_cause": "resetComponent 仅识别有限 appType",
    "repro": "用非 micro 路径打开需风量/核定",
    "fix_hint": "按实际菜单 path 扩展映射",
    "id": "BUG-082",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "风窗管控",
    "file": "src/views/vent/monitorManager/windowMonitor/index.vue:37-41",
    "title": "后门控制按钮文案错写成前门",
    "severity": "严重",
    "type": "control buttons sharing same paramcode / mislabeled control",
    "symptom": "界面显示“打开前门/关闭前门”，实际下发 rearGateOpen_S/rearGateClose_S，操作员会误控后门",
    "root_cause": "按钮展示文案复制前门未改，第二参数标题已是后门，UI 文本与指令不一致",
    "repro": "具备 window:gateControl 且 ndoorcount==2 → 看后两颗按钮文案与 setControl 参数",
    "fix_hint": "将后两颗按钮文案改为“打开后门/关闭后门”",
    "id": "BUG-083",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "风窗管控",
    "file": "src/views/vent/monitorManager/windowMonitor/index.vue:11-14,623-651",
    "title": "窗面积与窗角度控制共用 paramcode 1/2",
    "severity": "严重",
    "type": "control buttons sharing same paramcode",
    "symptom": "窗1/窗2 面积设定与角度设定最终都下发 paramcode='1'/'2'，后端无法区分面积/角度",
    "root_cause": "twoAreaControl 与 twoAngleControl 都 setControl('1'|'2')，handleOK else 分支直接 data.paramcode=handlerState",
    "repro": "同时开启 window:twoAreaControl 与 window:twoAngleControl → 分别设定面积/角度 → 抓包对比 paramcode",
    "fix_hint": "角度使用独立点位（如 frontSetAngle1），或在 value/附加字段中区分控制类型",
    "id": "BUG-084",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "风窗管控",
    "file": "src/views/vent/monitorManager/windowMonitor/index.vue:31-33,504-520",
    "title": "设定风窗面积误走角度弹窗流程",
    "severity": "严重",
    "type": "control buttons sharing same paramcode",
    "symptom": "权限 window:showAngleArea 的“设定风窗面积”调用 setAngle(1)，弹窗标题按角度生成，但点位仍 frontSetValue",
    "root_cause": "面积按钮错误绑定 setAngle 而非 setArea",
    "repro": "开启 window:showAngleArea → 点击“设定风窗面积” → 观察 modalTitle 与下发参数",
    "fix_hint": "改为 setArea(1)，或单独实现面积设定入口",
    "id": "BUG-085",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "风门集中同控",
    "file": "src/views/vent/monitorManager/airDoor/components/tipModal.vue:28-54",
    "title": "倒计时弹窗 setTimeout 递归不清理",
    "severity": "严重",
    "type": "setInterval/setTimeout poll without clear on unmount",
    "symptom": "提示弹窗显示后每秒递归创建定时器；关闭/卸载后仍继续；timeout<=0 时先 timer=undefined 再 clearTimeout(undefined) 无效，且仍调用 getMonitor()",
    "root_cause": "getMonitor 无论 timeout 是否归零都递归调用；clearTimeout 写在 timer=undefined 之后；无取消句柄、watchEffect 可见时重复启动",
    "repro": "触发 visibleTs30=true → 关闭弹窗或离开页面 → 观察仍有定时回调",
    "fix_hint": "timeout<=0 时 return 不再递归；保存并 clearTimeout；Visible=false 时清理；避免 watchEffect 重复启动",
    "id": "BUG-086",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "风门集中同控",
    "file": "src/views/vent/monitorManager/airDoor/index.vue:44-51",
    "title": "风门同控菜单拉取未判空 msgTxt[0]",
    "severity": "严重",
    "type": "null deref on mount",
    "symptom": "接口返回空/异常结构时 getMenuList 抛错，左侧菜单无法加载",
    "root_cause": "直接访问 res.msgTxt[0].datalist.length",
    "repro": "mock /monitor/device 返回无 msgTxt 或空数组 → 打开风门集中同控",
    "fix_hint": "使用可选链与默认 []：res?.msgTxt?.[0]?.datalist || []",
    "id": "BUG-087",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "主风机管控",
    "file": "src/views/vent/monitorManager/mainFanMonitor/hooks/useAreaSetSimulation.ts:37-109; useMainFanSimulation.ts:25-72",
    "title": "天窗/闸板面积模拟 setInterval 卸载未清理",
    "severity": "一般",
    "type": "setInterval/setTimeout poll without clear on unmount",
    "symptom": "开启 fanSwitchoverSimulation 后设定面积过程中离开页面，interval 仍改 selectData，可能写已销毁状态",
    "root_cause": "useAreaSetSimulation 仅在过程结束 clear；无 onUnmounted 遍历 activeProcesses 清理（对比 useFanSwitchoverSimulation 有 stopTick）",
    "repro": "开启模拟 → 设定天窗面积 → 过渡未完成即路由离开",
    "fix_hint": "在 composable 增加 dispose/onUnmounted，清理 Map 内全部 interval",
    "id": "BUG-088",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/gasWarn.vue:189-190",
    "title": "strinstallpos 为空时 indexOf 抛错",
    "severity": "一般",
    "type": "crash_on_mount",
    "symptom": "getDetailList 抛错，监测卡片不更新",
    "root_cause": "假定 strinstallpos 必为 string",
    "repro": "gas 明细 strinstallpos 为 null",
    "fix_hint": "const pos=el.strinstallpos||'' 再操作",
    "id": "BUG-089",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/ventilateWarn.vue:207",
    "title": "warnDes 为空时 indexOf 抛错中断菜单构建",
    "severity": "一般",
    "type": "crash_on_mount",
    "symptom": "左侧菜单空白且轮询中断",
    "root_cause": "el.warnDes.indexOf('预警') 无空保护",
    "repro": "sysTypeWarn 返回 warnDes 缺失条目",
    "fix_hint": "(el.warnDes||'').indexOf(...)",
    "id": "BUG-090",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/warn/dustWarn.vue:255",
    "title": "巷道温度单位错误依赖 humidity",
    "severity": "一般",
    "type": "wrong_field_binding",
    "symptom": "有温度无湿度时单位空白",
    "root_cause": "dw: el.humidity ? '(℃)' : ''",
    "repro": "temperature 有值 humidity 空时看单位",
    "fix_hint": "dw: el.temperature ? '(℃)' : ''",
    "id": "BUG-091",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "多灾融合预警",
    "file": "src/views/vent/monitorManager/alarmMonitor/alarm.data.ts:483-780",
    "title": "散点图动画 setInterval/resize 监听未清理",
    "severity": "一般",
    "type": "resource-leak",
    "symptom": "调用 setScatterEcharts 后即使销毁图表，30ms 动画与 window resize 监听仍存活",
    "root_cause": "setInterval(... ,30) 与 addEventListener('resize') 无返回清理函数",
    "repro": "进入使用 setScatterEcharts 的预警可视化 → 离开页面后 interval 仍跑",
    "fix_hint": "返回 { dispose }：clearInterval + removeEventListener + wwbzl.dispose()",
    "id": "BUG-092",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "安全监控分站管理",
    "file": "src/views/vent/safetyList/index.vue:144-146,71-76",
    "title": "调试风向取值与展示映射不一致",
    "severity": "一般",
    "type": "value_mismatch",
    "symptom": "调试选“反向”写入 '0'，列表展示逻辑把反风映射为 '2'，显示异常",
    "root_cause": "derictList 反向 value='0'，而 valueJc 渲染把 '2' 当作反风",
    "repro": "调试设备选反向并确认，查看列表风向展示",
    "fix_hint": "统一风向枚举（建议 1 正/2 反）并同步调试与展示",
    "id": "BUG-093",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "密闭监测系统",
    "file": "src/views/vent/monitorManager/obfurageMonitor/index.vue:107-113",
    "title": "forEach 内 data=Object.assign 未回写",
    "severity": "一般",
    "type": "dead_assignment",
    "symptom": "readData 字段未合并进列表项，监测展示缺字段",
    "root_cause": "dataSource.forEach 中 `data = Object.assign(data, readData)` 只改局部绑定，未写回数组元素",
    "repro": "对比接口 readData 与页面 options 字段是否缺失",
    "fix_hint": "改为 Object.assign(data, readData) 不重绑，或显式写回",
    "id": "BUG-094",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "局部风机管控",
    "file": "src/views/vent/monitorManager/{fanLocalMonitor,gateMonitor,windowMonitor,mainFanMonitor,balancePressMonitor,compressor,windrectMonitor}/**; src/views/vent/gas/gasAssessment/threejs/gasAssessmen.threejs.ts:多处 active debugger",
    "title": "生产路径残留 debugger 断点",
    "severity": "一般",
    "type": "debug-leftover",
    "symptom": "DevTools 打开时模型切换/动画初始化/工况辅助计算会暂停页面",
    "root_cause": "遗留未注释 debugger;（如 fanLocal.threejs.Two.ts:40-42, gate.threejs.two.ssl.ts:190, dandaoFcBd3.threejs.ts:170, mainWind.xj.threejs.ts:768/795, balancePress.threejs.ts:60, nitrogenHome_dtyj.vue:326, windrect.threejs.ts:366, gasAssessmen.threejs.ts:69, conditionAssistance.vue:207, fanLocal/index.vue:1549 等）",
    "repro": "打开 DevTools → 进入对应三维监控页触发模型加载/动画",
    "fix_hint": "删除全部 active debugger，或统一用开发开关包裹",
    "id": "BUG-095",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "报表数据映射",
    "file": "src/views/vent/reportManager/comment/report-modal.vue:135-138",
    "title": "formStates 被重新赋值为 Object.assign 返回值",
    "severity": "一般",
    "type": "reactivity",
    "symptom": "极端情况下表单代理引用混乱；与父级 reportMap 的 formState 断裂叠加更易丢字段",
    "root_cause": "formStates = Object.assign(formStates, newV) 不必要地重绑定 let",
    "repro": "编辑映射记录时反复打开弹窗观察字段回填",
    "fix_hint": "仅 Object.assign(formStates, newV) 或 for..in 赋值，不要重赋值 let",
    "id": "BUG-096",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "报表管理",
    "file": "src/views/vent/reportManager/index.vue:89-106",
    "title": "三类根节点重复挂载同一套子树",
    "severity": "一般",
    "type": "wrong_tree_build",
    "symptom": "系统/手动/模板三类下出现完全相同的业务分类，筛选易混淆",
    "root_cause": "getTreeList 对 listArr 每个根节点都 push 完整 res 树，未按业务类型分流",
    "repro": "打开报表管理对比三个根节点的 children",
    "fix_hint": "按返回字段或接口分类型填充到对应根节点",
    "id": "BUG-097",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "抽采泵站监测",
    "file": "src/views/vent/gas/gasPumpMonitor/components/monitorChart.vue:49-66",
    "title": "setInterval 用 clearTimeout 清理",
    "severity": "一般",
    "type": "resource-leak",
    "symptom": "离开页面后图表轮询可能继续，造成多余计算/内存占用",
    "root_cause": "timer=setInterval(...)，onUnmounted 调用 clearTimeout(timer)",
    "repro": "打开含 monitorChart 的泵站页 → 离开路由 → 断点/日志可见 interval 仍触发",
    "fix_hint": "改为 clearInterval(timer)",
    "id": "BUG-098",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "文件共享中心",
    "file": "src/views/vent/performance/fileDetail/index.vue:240-260,465-469",
    "title": "setInterval 用 clearTimeout 清理",
    "severity": "一般",
    "type": "resource_leak",
    "symptom": "关闭汇总弹窗或卸载后轮询未必停止，持续请求 queryVentMonReportJd",
    "root_cause": "timer=setInterval 但 handleCancelHz/onUnmounted 使用 clearTimeout",
    "repro": "打开汇总报表后关闭弹窗，观察是否仍持续请求 queryVentMonReportJd",
    "fix_hint": "统一使用 clearInterval(timer)",
    "id": "BUG-099",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "智能注浆系统",
    "file": "src/views/vent/monitorManager/groutMonitor/index.vue:1-35",
    "title": "2D 模型与 groutHome 同时渲染可能叠层",
    "severity": "一般",
    "type": "ui_logic",
    "symptom": "is2DModel 为 true 时流程图与监控壳同时存在，交互/遮罩异常",
    "root_cause": "v-if is2DModel 渲染 modelComponent，同时 activeKey==monitor 仍挂载 groutHome",
    "repro": "开启全局 is2DModel 进入注浆监控页",
    "fix_hint": "2D 时由单一容器负责模型，或让 groutHome 在 2D 模式跳过三维初始化",
    "id": "BUG-100",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "机电硐室管控",
    "file": "src/views/vent/home/configurable/configurable.data.ts:6164,6217",
    "title": "electro-champer / electro-chamber pageType 拼写分裂",
    "severity": "一般",
    "type": "config_typo",
    "symptom": "部分配置按错误 pageType 入库后，fetchConfigs('electro-champer') 只能拿到半套模块",
    "root_cause": "同一业务存在 champer/chamber 两种 pageType 字面量",
    "repro": "在配置表按两种 pageType 各查一次 records 数量",
    "fix_hint": "统一为一种拼写并做数据迁移",
    "id": "BUG-101",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "束管日报分析",
    "file": "src/views/vent/bundle/bundleMonitorTable/bundle-table.data.ts:412-435",
    "title": "保德 N₂ 子列重复两个平均值缺少最小值",
    "severity": "一般",
    "type": "wrong_column_dataIndex",
    "symptom": "N₂ 两列相同平均值；最小值无法展示",
    "root_cause": "第二、三列均为 title:平均值 + n2_ave",
    "repro": "保德束管日报看氮气表头",
    "fix_hint": "中间列改为最小值/n2_min",
    "id": "BUG-102",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "瓦斯人工巡检地点管理（NFC）",
    "file": "src/views/vent/gas/gasInspect/index.vue:331-342",
    "title": "筛「两次」误把 pagination.current 写成 2",
    "severity": "一般",
    "type": "copy_paste_bug",
    "symptom": "筛选两次后分页状态错乱",
    "root_cause": "case '2': pagination.current=2",
    "repro": "地点管理→巡检次数筛选→两次",
    "fix_hint": "两次也 current=1",
    "id": "BUG-103",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "用户日志管理",
    "file": "src/views/monitor/log/index.vue:34,61-66",
    "title": "初始 fieldMapToTime 格式与切换后不一致",
    "severity": "一般",
    "type": "config_mismatch",
    "symptom": "首次进入登录日志时时间范围映射可能无效，切 Tab 后才正常",
    "root_cause": "paramTime 初始为扁平数组，tabChange 才设为 [[field,[begin,end],fmt]] 结构",
    "repro": "首次进入不切 Tab，使用时间筛选对比切 Tab 后行为",
    "fix_hint": "初始化即使用与 case '1' 相同的 fieldMapToTime 结构",
    "id": "BUG-104",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "色谱仪报表分析",
    "file": "src/views/vent/bundleSpy/bundleSpyTable/index.vue; src/views/vent/monitorManager/comment/bundleSpyMonitorTable.vue:bundleSpyTable 175-195; bundleSpyMonitorTable 93-95",
    "title": "发火阶段筛选项文案不一致",
    "severity": "一般",
    "type": "logic",
    "symptom": "阶段统计为 0 或与报警字典不一致；同数据在不同组件统计结果不同",
    "root_cause": "bundleSpyTable 过滤 '加速氧化升温阶段'（与 warnFire-brt 一致），comment/bundleSpyMonitorTable 过滤 '加速氧化阶段（自热期）'；历史计算注释仍写 '加速氧化阶段'",
    "repro": "同一份含阶段字段的报表分别在两处打开，对比进度条计数",
    "fix_hint": "统一与后端/告警字典的阶段枚举（建议 '加速氧化升温阶段'）",
    "id": "BUG-105",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "防尘系统监测",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/device/modal/atomizing.modal.vue:33-42",
    "title": "主机位置字段错误附加 ℃ 单位",
    "severity": "一般",
    "type": "logic/display bug",
    "symptom": "位置类字段后显示温度单位，信息误导",
    "root_cause": "holderLocation 展示模板误加 ℃",
    "repro": "打开喷雾监测详情查看“主机位置”",
    "fix_hint": "去掉 ℃，位置字段无需单位",
    "id": "BUG-106",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "防火门智能管控",
    "file": "src/views/vent/home/configurable/firedoor/fireDoorMonitor.vue:76-99",
    "title": "场景列表为空仍继续后续逻辑且配置增强未启用",
    "severity": "一般",
    "type": "incomplete_init",
    "symptom": "无防火门场景时下拉为空、模块无有效数据；服务端配置未走 updateEnhancedConfigs",
    "root_cause": "records 为空时仍调用 loadFireGateData；updateEnhancedConfigs 被注释",
    "repro": "manageFireList 返回空→页面无场景可选且面板无数据",
    "fix_hint": "无 records 时提示并 return；恢复 updateEnhancedConfigs(configs)",
    "id": "BUG-107",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "防灭火系统监测",
    "file": "src/views/vent/monitorManager/deviceMonitor/components/device/modal/firemon.modal.vue:63-65",
    "title": "智慧球温度值单位误标为 %",
    "severity": "一般",
    "type": "logic/display bug",
    "symptom": "温度值旁显示 % 而非 ℃，监控读数语义错误",
    "root_cause": "模板单位复制错误",
    "repro": "打开 firemon 详情查看温度项单位",
    "fix_hint": "将单位改为 ℃",
    "id": "BUG-108",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "预警联动控制",
    "file": "src/views/vent/deviceManager/workingFace/CustomNormalTable.vue:250-251",
    "title": "批量删除未传 handleSuccess 回调",
    "severity": "一般",
    "type": "undefined_api_ref",
    "symptom": "确认后 handleSuccess is not a function，列表不刷新",
    "root_cause": "batchDeleteById(params, handleSuccess) 被调用为 batchDelete({ids})",
    "repro": "预警联动批删点确认看控制台",
    "fix_hint": "传入 reload 作为第二参",
    "id": "BUG-109",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  },
  {
    "module": "预警联动控制",
    "file": "src/views/vent/deviceManager/workingFace/index.vue:1-92",
    "title": "预警联动控制落到通用智能管控 CRUD，无联动逻辑",
    "severity": "一般",
    "type": "incomplete",
    "symptom": "范围名为预警联动控制，实际仅为 managesys 列表增删改，无预警联动控制流程",
    "root_cause": "页面复用 CustomNormalTable + managesys_list；onMounted 空实现，无联动策略/告警动作 UI",
    "repro": "按菜单进入预警联动控制 → 仅见设备/系统管理表",
    "fix_hint": "补齐联动规则配置与执行界面，或修正菜单路由到正确页面",
    "id": "BUG-110",
    "status": "新建",
    "date": "2026-11-02",
    "method": "静态审查"
  }
]